| Kingpins |
|
| ST001 Kingpin kit one side |
£16.00 |
| ST001k Full kingpin kit- everthing you need both sides |
£28.00 |
| ST002 Tool set to fit your kingpin comprehensive set with a tool for each step of removal and reassembly plus instructions |
£30.00 |
| ST003 Top welch plug cap |
£1.00 |
| ST003a Top welch plug dishing tool |
£20.00 |
| ST003b Special cutting tool for swivel housing |
£25.00 |
| ST004 Bottom threaded plug |
£3.50 |
| ST004a Tap for plug thread |
£20.00 |
| ST005 Grease nipple for swivel housing |
£1.00 |
| ST006 Lock washer for the 2 bolts holding steering arm to hub |
£1 each |
| Steering |
|
| ST007 Steering arm LH side |
£55.00 |
| ST008 Steering arm RH side |
£55.00 |
| ST007/8 Steering arm set (pair) |
£100.00 |
| ST009 Track rod end casting holds ball of steering arm LH side Or genuine Citroen for £30 |
£17.00 |
| ST010 Track rod end casting holds ball of steering arm RH side Or genuine Citroen for £30 |
£17.00 |
| ST011 Spring for inside of ST009 and ST010 |
£5.00 |
| ST012 Screw plug for end of ST009 and ST010 (castellated) |
£2.00 |
| ST012a Special tool for removing nut |
£16.00 |
| ST013Track rod end gaiter Good quality |
£6.00 |
| ST013a Track rod end gaitor Original quality |
£9.00 |
| ST014 Track rod end repair kit Includes x2 cups, x1 spring, x1 castellated nut, x1 gaiter per side |
£17.50 |
| ST014p Track rod end repair kit Pair Includes x2 cups, x1 spring, x1 castellated nut, x1 gaiter per side |
£30.00 |
| ST015 Steering rack reconditioned exchange unit no surcharge, no exchange, no hassle! |
£150.00 |
| ST015a Steering rack reconditioned LHD Or £145 exchange |
£185.00 |
| ST016 Steering pinion 2CV6 up to 1975 – 7 teeth |
£25.00 |
| ST017 Steering pinion 2CV6 1975 onwards -8 teeth |
£25.00 |
| ST018 Pinion ring nut + seal |
£5.50 |
| ST019 Steering rack ball overhaul kit includes ball pins, spring, castle screw and 4 cups |
£26.00 |
| ST020 Nyloc nut for ball pins Pair |
£1.00 |
| ST021 Track rod adjuster kit Pair stainless steel Superior to any other on the market |
£40.00 |
| ST021a Track rod adjuster kit Pair Mild steel |
£30.00 |
| ST022 Steering rack guide ring EEC sourced from europe’s biggest 2CV parts supplier |
£20.00 |
| ST023 Anti rattle rubber |
£4.00 |
| ST024 Steering column clamp and bolt |
£5.00 |
| ST024a Steering Collumn |
£85.00 |
| ST024b Steering Collumn base grommet Both parts |
£7.50 |
| Wheel bearings |
|
| ST025 Wheel bearing 2CV/Dyane front or rear |
£20.00 |
| ST025a Wheel bearing 2CV/Dyane front or rear SKF or SNR Top quality bearing |
£35.00 |
| ST026 Wheel bearing seal (x2 needed per front bearing, x1 needed per rear) |
£2 each |
| ST027 Wheel bearing retaining ring front or rear |
£8.00 |
| ST028 Dust cap for rear bearing (plastic) |
£2.50 |
| ST029 Wheel bearing Ami/AK/Acadiane front or rear |
£30.00 |
| ST029a Wheel bearing Ami/AK/Acadiane front or rear SKF or SNR |
£45.00 |
| ST030 Locking ring for ST029 76mm |
£15.00 |
| ST030a Rear drum 44mm Hub nut |
£7.50 |
| Shock absorbers |
|
| ST031 Shock absorbers front Pair – original Lipmesa 1970 onwards 2CV/Dyane |
£65.00 |
| ST032 Shock absorbers rear Pair – original Lipmesa 1970 onwards 2CV/Dyane |
£65.00 |
| ST032p We do not sell budget shocks, instead we sell high quality original parts at LOW prices a full set of 4 lipmesa ONLY |
£110.00 |
| ST033 Shock absorber mounting pin fits in chassis |
£10.50 |
| ST034 Shock absorber mounting nut |
£0.50 |
| ST035 Shock absorbers front Ami/AK/Acadiane Pair |
£70.00 |
| ST036 Shock absorbers rear Ami/AK Pair |
£70.00 |
| ST037 Shock absorbers rear Acadiane Pair |
£70.00 |
| Suspension arms & Bearings |
|
| ST038 Suspension arm front LH side |
£135.00 |
| ST039 Suspension arm front RH side |
£135.00 |
| ST039a We do have a large stock of excellent second hand arms. Stripped and inspected left or right |
| ST040 Suspension arm bearing |
£25.00 |
| ST041 Suspension arm bearing securing nut |
£9.00 |
| ST042 Suspension arm bearing seal |
£3.00 |
| Suspension unit under car |
|
| ST043 Suspension unit casting |
£18.00 |
| ST044 Suspension unit end cap (weld on) |
£16.00 |
| ST045 Suspension unit slider cup x2 per pot |
£17.00 |
| ST046 Suspension unit spring front |
£40.00 |
| ST047 Suspension unit spring rear |
£43.00 |
| ST048 Tie rod front |
£13.50 |
| ST049 Tie rod rear |
£13.50 |
| ST050 Suspension unit bump stop (rubber doughnut) |
£7.50 |
| ST051 Tie rod rubber gaitor |
£3.00 |
| ST052 Suspension unit threaded mounting sleeve |
£17.00 |
| ST053 46mm nut for ST052 |
£4.00 |
| ST053s 46mm nut full set of 8 |
£30.00 |
| ST054 Standard length tie rod end |
£13.00 |
| ST054L Tie rod eye long version for kit cars, lowered suspension etc |
£15.00 |
| ST054s Short tie rod end helps raise car |
£13.00 |
| ST055 Suspension Cans in stainless steel Pair Compare this price |
£130.00 |
| ST055a Stainless steel suspension cans complete All new parts |
£250.00 |
| ST055b Suspension cans in steel complete |
£200.00 |
| ST055c Suspension cans Second hand complete inspected, cleaned and painted |
£100.00 |
| ST056 Suspension knife edge front |
£2.00 |
| ST057 Suspension knife edge rear |
£2.00 |
| ST058 Clip to secure knife edge Pair |
£1.25 |
| We can also supply suspension parts for other A series models including vans. Please call with your requirements |
| Steering locks |
|
| ST059 Steering lock 2CV6 |
£70.00 |
| ST059a Steering lock genuine Citroen |
£140.00 |
| ST060 Steering lock Dyane |
£110.00 |
| ST061 Steering lock U bolt (comes as standard in lock kit ST059) Including standard nuts |
£5.00 |
| ST062 Shear nut for U bolt |
£3 each |
| ST063 Ignition contact drum |
£30.00 |
| ST064 Ignition contact drum aftermarket part |
£20.00 |
