2CV Parts
Engine
| Engines | |
| EP000 reconditioned engine Please ring for details and options- On an exchange basis | £850.00 |
| EP000a Partially rebuilt engine Please ring for details and options- On an exchange basis | £500.00 |
| Engine parts | |
| EP001 Oil filter purflux Includes sump washer | £6.50 |
| EP001a Oil Filter GIF Includes sump washer | £4.50 |
| EP002 Sump Washer (one free with every oil filter ordered) | £0.25 |
| EP003 Cylinder head LH (includes valves) | £135.00 |
| EP004 Cylinder head RH (includes valves) | £135.00 |
| EP005 Pair of Cylinder heads reconditioned with new valves | £150.00 |
| EP006 Inlet valve | £7.00 |
| EP007 Exhaust valve compatible with lead-free fuel | £10.00 |
| EP008 Piston + barrel set 602cc 9 to 1 compression Made by Bretille | £175.00 |
| EP008a Piston + barrel set 602cc 9 to 1 compression Made by perfect circle | £175.00 |
| EP009 Piston + barrel set 602cc 8.5 to 1 compression As fitted to late model 2cv’s to allow them to run on low octane unleaded | £125.00 |
| EP010 Piston + barrel set 435cc 2CV4 | £150.00 |
| EP010a Piston + barrel set 425cc | £120.00 |
| EP011 Piston ring set (for both pistons) 602cc 1970-1976 Standard bore only Also available manufactured by Perfect circle for £40 | £25.00 |
| EP012 Piston ring set (for both pistons) 602cc 1976-1990 Standard bore only Also available manufactured by Perfect circle for £40 | £30.00 |
| EP013 Piston ring set (for both pistons) 435cc 2CV4 | £40.00 |
| EP014 Oil Cooler 2CV6/Dyane 602cc (see EP039 for seals) original part Includes x2 seals | £145.00 |
| EP015 Heavy duty non O/E cooler same as EP014 but cheaper A very good quality copy Includes x2 seals | £75.00 |
| EP016 Oil cooler 2CV4 435cc | £125.00 |
| EP017 Oil pressure sender unit 602cc 1970 onwards Choice of Bullet, screw or Lucar connecter | £7.50 |
| EP018 Oil feed pipe 2CV6 (from cases to cylinder heads) see EP038 for seals Also available superior quality pipe at £40 | £30.00 |
| EP019 Engine breather 2cv6/Dyane 602cc Original equipment part | £138.00 |
| EP020 Engine breather as EP019 but non O/E part This is not a bad quality part as described by our competitor who would like to sell you one for twice the price, we have sold hundreds of these with very good feedback | £65.00 |
| EP021 CDP Valve replaces breather | £35.00 |
| EP022 Gasket for engine breather to case, free with breather | £0.50 |
| EP023 Rubber pipe from breather to air filter housing | £6.00 |
| EP024 Rubber pipe from breather to dipstick tube | £1.50 |
| EP025 Engine breather beak covers to 1954 | £14.00 |
| EP026 Beak cover 1954-1963 | £14.00 |
| EP027 Beack cover 1963-1970 | £14.00 |
| EP028 Beak only 1954-1970 | £5.00 |
| EP029 Gasket set 2CV6 set (excludes crank seals) | £15.00 |
| EP029a Gasket set 2CV6 full set including crank seals | £22.00 |
| EP029b Gasket set 1949-1960 3 stud | £16.00 |
| EP029c Gasket set 1960-1963 3 stud | £12.50 |
| EP029d Gasket set 1963-1969 4 stud Includes crank seals | £25.00 |
| EP030 Rocker cover gasket 602cc pair | £3.00 |
| EP031 Inlet manifold gasket 2cv6 pair | £2.00 |
| EP032 Exhaust manifold gasket 2cv6 pair | £2.00 |
| EP032a Super quality fibre exhaust manifold gasket pair | £9.00 |
| EP033 Crank seal (front) 2CV6/Dyane 602cc | £3.50 |
| EP034 Crank seal (rear) 2CV6/Dyane 602cc | £5.00 |
| EP035 Crank seal (rear) 2CV4 435cc | £7.00 |
| EP036 Valve stem oil seals full set x2 inlet and x2 exhaust | £10.00 |
| EP037 Pushrod tube oil seal (spectacle seal) 2CV6 1976 onwards (pair) | £3.00 |
| EP038 Copper seal oil feed pipe (x3 needed) set of 3 | £2.00 |
| EP039 Rubber seal oil cooler to cases pair | £1.50 |
| EP040 Rubber seal crankshaft spigot bush | £4.50 |
| EP041 Engine cooling fan plastic 1970 onwards | £16.00 |
| EP042 Alternator belt pulley cover | £11.00 |
| EP043 Fan Pulley non O/E | £36.00 |
| EP044 Fan bolt secures pulley | £2.00 |
| EP045 Wire stone guard, fits to front cowl as fan protection | £25.00 |
| EP046 Special tool for removing fan pulley bolt | £8.00 |
| EP047 Engine mounts (x2 per car) | £7.50 each |
| EP048 Gearbox mount | £8.0 |
We also stock gaskets, seals and engine sundries new and used for pre 1970′s cars (flat manifold engines). We also have all the nuts, bolts and washers you are ever likely to need when working on your engine, so many that is is easier if you ask when buying your other parts!
